Plasma Polishing Machines In The Mobile Phone Industry

Plasma polishing machine as a new polishing process, is a development trend of stainless steel polishing. The visit method does not use dirty and tired brawn labour, do not use the environment pollution and damage to the health of the producer chemicals, and can reach the traditional method is difficult to reach high quality, polishing speed, low production costs. This polishing method is based on the principle of plasma bypassing and polishing, and can be applied to general and messy workpieces with etched textures. If you can properly use the plasma plasma polishing machine will save us a lot of time and money.

I. The operating principle of the plasma polishing machine

In the role of high temperature ultra-high current electrolyte aquatic ions. Separate chemical wave state plasma, the use of electrolyte water soluble and high temperature, high pressure with the occurrence of such as son, plasma and the workpiece's appearance friction and polishing effect. The primary role for the ionic conflict. Plasma plasma polishing machine for the combination of chemical action and electrochemical action. The main role for the phi, deburring, add wear resistance, add brightness, any side of the workpiece can be polished.

II. Plasma plasma polishing machine practical use

To the general mobile phone shell, for example, basically all mobile phone manufacturers are stainless steel mobile phone shell requirements for the appearance of no scratches, no texture, no white spots is also a mirror effect. Polishing process is generally from the stamping out thoroughly formed products to start, the follow-up process is generally laser, electroplating, oil spraying and other polishing. Generally choose hand polishing, or hand polishing and plasma plasma polishing machine combination.

Hand polishing that is hand polishing, by product and hemp, line, cloth wheel friction role. The disadvantages of the hand polishing process are obvious. Manual polishing efficiency is very slow, workers are also very high wages. And polishing is a great harm to human body industry. The management of polishing workers is a major headache, as workers are free-spirited and highly mobile. Plasma polishing reduces environmental stress for our customers. The polishing solution used by FaiDisk Automation is very environmentally friendly, and the waste solution can be discharged directly without causing pollution or can be recycled with a little treatment. This reduces production costs for our customers.

The semi-automatic and fully automatic environmental protection plasma polishing equipment is controlled by automation, which is simple to operate and easy to maintain, reducing staff and labour costs. It also saves the customer a lot of material consumption caused by traditional polishing methods such as manual polishing, electrolytic polishing and chemical polishing. The frictional effect of plasma polishing on the surface is generally to remove 1~2 filaments. Stamping marks and surface orange peel cannot be removed. The use of manual polishing and plasma polishing combined approach.

That is, the use of manual opening at the beginning to remove the surface embossed marks and orange peel. Leaving a very deep spar wheel pattern using a very fine wire wheel pattern to remove. At this point the wire wheel pattern left behind is removed using plasma polishing. The final result is a mirror-bright surface without any grain, with r-angles on the angles of the surface. The inside of the workpiece is as polished and bright. This piece uses this plasma polishing mainly in the removal of artificial grinding patterns, less a cleaning process, increase the aesthetics, high rate of finished products.